Operation and settings
25
PTZ Configuation
Allows the user to configure different PTZ controls by using different
PTZ protocols.
PTZ configuration
> Enable: Check to use the PTZ protocol.
> Pan speed: Enter the panning speed of the PTZ device in the
edit box. Default value is depending on protocol.
> Tilt speed: Enter the tilting speed of the PTZ device in the
edit box. Default value is depending on protocol.
> Zoom speed: Enter the zoom speed of the PTZ device to
view the object wide or tele at a distance. Default value is
depending on protocol.
> Focus speed: Enter the focus speed of the PTZ device
to focus an object clearly near or far. Default value is
depending on protocol.
> Enable Tilt Limit: Check to use the Tilt limit.
> Auto Return Mode: This function can be used to specify
automatic return to a particular mode.
- Off: Not in use.
- Last Tour: After the Auto Return Time is over, the camera
restarts the previous tour.
- Home: When the touring is stopped, returns to the
camera’s basic position after the set time.
Note:
You have to set the basic position to perform this
function.
> Auto Return Time: Enter the auto return time of the PTZ
device in the edit box. If you set the value to 0, auto return
feature is deactivated.
• Save: Click this button to confirm the settings.
Summary of Contents for LNP2810
Page 63: ......
