LG LNP2810 Owner'S Manual Download Page 8

Page: 8 / 63

Operation and settings

1. Click this button to open the folder

browse window. Click the button

again in next time, video is recorded

automatically without selection of

folder.
Note:
If you want to change the folder,

move to other pages or press

therefresh button.

2. Recording button is activated and

recording will be started.
Note:
If recording exceed the time(1 hour)

or size limit (1 GB), recording is

stopped automatically with warning.

3. To stop the recording, click this

button during the recording.

Click this button to connect or

disconnect the audio communication

between the LG IP device and the

connected PC.
(Color icon: On, Gray scale icon: Off.)

Click this button to switch the

microphone off and on for the computer.
(Color icon: On, Gray scale icon: Off.)

Click this button to switch the sound off

and on, for the speaker of the computer.
(Color icon: On, Gray scale icon: Off.)

Summary of Contents for LNP2810
































































Search results

Summary of Contents for LNP2810

Reviews:

Related manuals for LNP2810

Brands by name

Popular brands

LG LNP2810, Owner'S Manual

Search results

Summary of Contents for LNP2810

Reviews:

Related manuals for LNP2810

Brands by name

Popular brands