Operation and settings
49
Note:
The parts with the registered mask numbers from AREA1 to AREA4
have the same color. (So do the parts with the numbers from AREA5
to AREA8.) If you change the mask color, the registered mask color
will be changed automatically with the same color for each of group
(AREA1 to AREA4, AREA5 to AREA8).
3D-DNR setting
1. Select [3D-DNR] option.
If pictures are not clear due to noise, this option would reduce
the noise of picture.
2. Use or button to select an option.
Notes:
• If you set the AGC to [OFF] on the [EXPOSURE] menu,
the [3D-DNR] function is not available and [OFF] mark is
displayed.
• When you use this function, the afterimage may occur.
Special menu settings
FREEZE
1. Select the [FREEZE] option on the [SPECIAL] menu.
2. Use or button to set up the ON or OFF.
COLOR
You can switch the displayed picture to gray scale or color.
1. Select the [COLOR] option on the [SPECIAL] menu.
2. Use or button to change a color effect.
• ON: To display the picture with color.
• OFF: To display the picture with grayscale.
SHARPNESS
The degree to which the boundary of the two portions is clearly
distinguished.
1. Select the [SHARPNESS] option on the [SPECIAL] menu.
2. Use or button to adjust the option. If you set the sharpness
value to higher, the image outline becomes sharp. If you set to
lower value, the image outline becomes dim.
Summary of Contents for LNP2810
Page 63: ......
