Operation and settings
47
SENS-UP
If pictures are not clear due to darkness, this SENS-UP operation
would increase the sensitivity of picture.
1. Select [SENS-UP] option on the [EXPOSURE] menu.
2. Use or button to select a mode.
• AUTO: Adjust the sensitivity of the picture automatically.
> SENS-UP LIMIT: Use or button to set the
SENS-UP limit.
> EXIT: Select a mode and click button to exit the menu.
Note:
If you set to one of the SHUTTER options except AUTO on the
[SHUTTER] menu or [AGC] to [OFF], the [SENS-UP] setting is not
available and [---] mark is displayed.
White Balance settings
Select the method by which the camera shifts its output colors to
compensate for the color of a light source.
1. Select the [WHITE BALANCE] option.
2. Use or button to select a mode then click button.
• ATW (Auto-Tracing White Balance): In this mode, white
balance has better coverage than auto. Proper white balance
may not be obtained under the following conditions:
> When the scene contains mostly high color temperature
objects, such as a blue sky or sunset.
> When the scene is dim.
• AUTO: You can set the white balance options automatically.
• ONE PUSH: If you select the ONE PUSH mode, you will be
able to set up the White Balance automatically using
button.
• MANUAL: You can set the white balance options manually.
> COLOR TEMP: Use or button to select a function.
- INDOOR: The color temperature range for the proper
white balance is approximately 3 200 K.
Summary of Contents for LNP2810
Page 63: ......
