LG LNP2810 Owner'S Manual Download Page 37

Page: 37 / 63

Operation and settings

4. Select the authority from the drop down list to provide

the access rights to each user and then click the [Save]

to confirm your selection.

- Administrator: Allows you to operate setup menus

and to view live images.

- Power user: Use of the limited functions of the

system. (The Configuration menu is not allowed.)

A power user can use the Live View, OSD control and

audio functions.

- Normal user: Provides the lowest level of access,

Allows to view live images only.

- Custom user: The user can login and view the live

stream image only when the “Enable anonymous

> Edit the registered user

You can change the password or authority.
1. Choose the user ID and then click the [Edit] button.
2. Change the Password or Authority, then click the [Save]

button to confirm your selection.

> Delete the registered user

1. Choose the user ID you want to delete.
2. Click the [Remove] button.
Note:
The default administrator user ID ‘admin’ and ‘anonymous’

are permanent and cannot be deleted.

Anonymous

> Enable anonymous login

Check the box to enable anonymous user login - allows the

user access for only viewing the live stream image.

Maximum RTP stream connection

> Maximum number of simultaneous stream connection:

Set this number to limit the number of simultaneous stream

connections.
The connections depend on the stream configuration as

shown in the following Maximum RTP stream connection by

stream configuration.

- LW9422 series / LNP3020T series

Video Codec Resolution

Frame

Rate

Quality

Maximum

RTP

stream

H.264

1 920 x 1 080

HIGHEST Up to 10

MJPEG

1 920 x 1 080

HIGHEST

Up to 7

- LNP2810(T) series

Video Codec Resolution Frame

Rate

Quality

Maximum

RTP

stream

H.264

1 280 x 720

HIGHEST

Up to 10

MJPEG

1 280 x 720

HIGHEST

Up to 7

Note:
Preview window of the IP device setting and preset setting

are affected by this setting.

• Save: Click this button to confirm the settings.

Summary of Contents for LNP2810
































































Search results

Summary of Contents for LNP2810

Reviews:

Related manuals for LNP2810

Brands by name

Popular brands

LG LNP2810, Owner'S Manual

Search results

Summary of Contents for LNP2810

Reviews:

Related manuals for LNP2810

Brands by name

Popular brands