LG LNP2810 Owner'S Manual Download Page 44

Page: 44 / 63

Operation and settings

SPECIAL

OSD

OFF

USER TITLE

ON/OFF

ZOOM MAG

ON/OFF

FUNCTION

ON/OFF

LANGUAGE

ENG/CHN(SC)/KOR/RUS/JPN/CHN(TC)

INITIAL SET

EXIT

RET/TOP/END

RESET

FACTORY

RESET

S/W

VERSION

EXIT

RET/TOP/END

General Operation

1. Click the [OSD control] button on the LG Smart Web Viewer.
2. Click button on the OSD control window.

The camera setting menu appears on the live view window.

3. Use or button to select an option then click button.

Submenu appears.

4. Use   or   button to select a submenu option.
5. Use   or   button to select a value.
6.  Select [EXIT] option then click   button to exit the setup menu.

In the submenu, use or button to select the [EXIT] then use

or button to select a mode and click button to exit the

setup menu.

- RET: Return to the previous.
- TOP: Return to the CAMERA SETTING menu screen.
- END: Exit the setup menu.

Summary of Contents for LNP2810
































































Search results

Summary of Contents for LNP2810

Reviews:

Related manuals for LNP2810

Brands by name

Popular brands

LG LNP2810, Owner'S Manual

Search results

Summary of Contents for LNP2810

Reviews:

Related manuals for LNP2810

Brands by name

Popular brands