Operation and settings
21
> Mask Color : You can make any color by adjusting R.G.B
LEVEL and adjust the transparency of MASK.
> Height: Increase or decrease the vertical size of the mask.
> Width: Increase or decrease the horizontal size of the mask.
> Move Y: Moves vertical position of the mask.
> Move X: Moves horizontal position of the mask.
• Default: Click this button to restore the IP device back to original
factory settings.
Notes:
• The [Privacy Mask] size is recommended to set the size default
or more.
• Adjust the size about 50 % bigger, to cover the object
completely.
• Click the [Mask Reset], before you adjust the new privacy
settings.
Special
> 3D-DNR: If pictures are not clear due to noise, this option
would reduce the noise of picture. When you use this
function, the afterimage may occur.
> Color: You can switch the displayed picture to gray scale or
color.
- On: To display the picture with color. If you set [On], the
[Color Level] option is activated. Adjust the [Color Level]
value using by jog controller or enter the desired value.
- Off: To display the picture with grayscale.
> Freeze: Click [On] or [Off] button to set up the [Freeze]
Option.
Summary of Contents for LNP2810
Page 63: ......
