LG CodeZero A9 Series Service Manual Download Page 78

Page: 78 / 104

-78-

Only training and service purposes

Failures and measures

Failures

The power cord is

connected, but the

product won’t

operate.

Dust cannot be

removed or a loud

noise occurs.

The suction motor

won’t operate

even though the

operation button

has been pressed.

Check

No booting sounds

when the power

cord is connected.

The suction

opening and

closing hole won’t

open.

No sound occurs

when the operation

button is pressed.

Cause

The Main PCB is faulty.

The suction opening and

closing hole is locked.

A defect in the operation

panel touch.

The power cord is faulty.

The suction opening and

closing hole motor is faulty.

The harness is connected

incorrectly.

The harness is connected

incorrectly.

The Display PCB is faulty.

The dust canister cover hook

release unit is locked.

A9S is mounted incorrectly.

The Main PCB is faulty.

The dust canister cover hook

release unit motor is faulty.

The harness is connected

incorrectly.

The harness is connected

incorrectly.

The A9S dust canister cover

is faulty.

The pre-filter is clogged.

The exhaust filter is clogged.

The dust bag is completely

filled.

The air channel is clogged.

The protective vinyl has not

been removed from A9S.

The sealing unit is locked.

The sealing motor is faulty.

The charging terminal is

faulty.

The harness is connected

incorrectly.

The suction motor is faulty.

The Main PCB is faulty.

The harness is connected

incorrectly.

The recognition of battery

installation is faulty.

The charging terminal is faulty.

The battery charging terminal

is faulty.

A9S is mounted incorrectly.

The battery is faulty.

The Main PCB is faulty.

The harness is connected

incorrectly.

The harness is connected

incorrectly.

Repairs and measures

Replace the Main PCB.

Disassemble the Duct Assembly and

replace any faulty parts.

Replace the Display PCB or replace the

Touch Gasket.

Replace the power cord.

Replace the suction opening and closing

hole motor.

Check the harness connection status and

replace it if necessary.

Check the harness connection status and

replace it if necessary.

Replace the Display PCB.

Disassemble the Duct Assembly and

replace any faulty parts.

Remount it so that the notification sound is

heard.

The Main PCB is faulty.

Replace the dust canister cover hook

release unit motor.

Check if the battery is inserted into A9S.

Check the harness connection status and

replace it if necessary.

Check the harness connection status and

replace it if necessary.

Replace the A9S dust canister cover.

Wash and reuse or replace the pre-filter.

Wash and reuse or replace the exhaust filter.

Replace the dust bag.

Disassemble the Duct Assembly and

remove any foreign objects.

Remove the protective vinyl.

Disassemble the Duct Assembly and

replace any faulty parts.

Replace the sealing motor.

Replace the charging terminal or the

charging terminal harness.

Check the harness connection status and

replace it if necessary.

Replace the suction motor.

Replace the Main PCB.

Check the harness connection status and

replace it if necessary.

Replace the Top Cover Assembly.

Replace the charging terminal.

Replace the Top Cover Assembly.

Remount it so that the notification sound is

heard.

Replace the battery.

Replace the Main PCB.

Check the harness connection status and

replace it if necessary.

Check the harness connection status and

replace it if necessary.

Sealing is

applied, but the

suction motor

won’t operate.

The spare battery

cannot be

charged.

The product body

cannot be

charged.

A booting sound is

heard when the

power cord is

connected, but the

LED on the

operation panel

won’t light.

The dust canister

cover in A9S won’t

open.

The suction power

is weak.

The sealing

bracket won't

operate.

Summary of Contents for CodeZero A9 Series



































































Search results

Summary of Contents for CodeZero A9 Series

Reviews:

Related manuals for CodeZero A9 Series

Brands by name

Popular brands

LG CodeZero A9 Series, Service Manual

Search results

Summary of Contents for CodeZero A9 Series

Reviews:

Related manuals for CodeZero A9 Series

Brands by name

Popular brands