LG A2UW146FA0 Service Manual Download Page 63

Page: 63 / 268

Service Manual

Install the Indoor unit onto Installation Plate.

• Insert 2 hooks on the both left and right side of the unit

to the inner slot (wall side) of the Installation Plate.

• Secure the unit to the Installation Plate with four M8

bolts and washers.

• Hook up the Inlet Grille Hook to the cabinet.
• Hang the Inlet Hanger to the screw.

• Fit the projection hooks of the side plates to the 'Side

Panel' and the 'Front Panel' by lifting it.

• Fasten the screws.

• Before working, refer to "Connecting pipe
and cable to Indoor Unit".

Inner slot

Installation

Summary of Contents for A2UW146FA0













































































































































































































































































Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands

LG A2UW146FA0, Service Manual

Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands