LG A2UW146FA0 Service Manual Download Page 70

Page: 70 / 268

Multi type Air Conditioner

Installation

Remove the battery cover from the remote con-
troller.
• Slide the cover according to the arrow direction.

Insert the two batteries.
• Be sure that the (+) and (-) directions are correct.
• Be sure that both batteries are new.

Re-attach the cover.
• Slide it back into position.

REMOTE CONTROL PREPARATION(OPTIONAL)

HOW TO MOUNT ONTO A WALL

HOW TO INSERT BATTERIES

• Do not use rechargeable batteries,

such batteries differ from standard dry
cells in shape, dimensions, and per-
formance.

• Romove the batteries from the remote

controller if the air conditioner is not
going to be used for some long time.

HOW TO INSERT BATTERIES

Summary of Contents for A2UW146FA0













































































































































































































































































Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands

LG A2UW146FA0, Service Manual

Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands