LG A2UW146FA0 Service Manual Download Page 130

Page: 130 / 268

130

Multi type Air Conditioner

Disassembly of the parts

3) To remove the Evaporator.

- Remove 4 screws securing the evaporator.
- Pull the evaporator out from the chassis carefully.

4) Before removing the Turbo Fan.

- Remove the securing screws from the chassis.
- Pull the pipe cover, top cover and the air guide.

5) To remove the Motor.

- Remove the securing bolt from the motor shaft.
- Pull the fan out from the motor shaft.
- Remove 4 screws securing motor mount from the

chassis and lift up the motor mount and the brack-
et.

Top Cover

Pipe Cover

Air Guide

Turbo Fan

Bracket

Bolt

Motor Mount

Summary of Contents for A2UW146FA0













































































































































































































































































Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands

LG A2UW146FA0, Service Manual

Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands