LG A2UW146FA0 Service Manual Download Page 134

Page: 134 / 268

134

Multi type Air Conditioner

Disassembly of the parts

• Unhook the tab on the right inside of the chassis

at the same time, slightly pull the evaporator
toward you until the tab is clear of the slot.

5) To remove the Motor Cover

• Remove 2 securing screw.
• Pull the motor cover out from the chassis

carefully.

6) To remove the Cross-Flow Fan

• Loosen the screw securing the cross-flow fan to

the fan motor (do not remove).

• Lift up the right side of the cross-flow fan and the

fan motor, separate the fan motor from the
cross-flow fan.

• Remove the left end of the cross-flow fan from

the self-aligning bearing.

Motor cover

Summary of Contents for A2UW146FA0













































































































































































































































































Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands

LG A2UW146FA0, Service Manual

Search results

Summary of Contents for A2UW146FA0

Reviews:

Related manuals for A2UW146FA0

Brands by name

Popular brands