LG 43UV770M Commercial Mode Setup Manual Download

Page: 100 / 123

100

206-4324

Reference: Using the TV’s Zoning Features (Cont.)

Using the Wi-Fi Zoning Feature with Cloning Configuration

A location-specific Wi-Fi configuration / Clone (.tlx) file may be saved (exported) from a Master TV and

then be used to configure Target TVs. First, the wireless network (i.e., the access point login data) must

be configured in the Master TV’s IP Environment Menu (see “Configuring a Wi-Fi Network Connection”

on page 74). Then, a Wi-Fi Zone # must be set in the Master TV (see “Set the TV Zone # and/or Wi-Fi

Zone # in the TV” below). If desired, a TV Zone # may also be set in the Master TV.
For example, if the Wi-Fi Zone # is set to 4 and the TV Zone # is set to 5 before

the Clone file export

initiated

, the Master TV’s Installer Menu profile will be saved with the Zone 5 assignment, and within that

Installer Menu profile, the access point login data for wireless networking

(i.e., SSID, security type, and

security key)

will be saved with a Wi-Fi Zone 4 assignment. In order to configure the Target TVs with the

proper Installer Menu profile and access point login data, you must set both the TV Zone # and the Wi-Fi

Zone # in the Target TVs accordingly before importing the Clone file. See “Set the TV Zone # and/or Wi-Fi

Zone # in the TV” below. Also, see “Cloning Procedures” on pages 58 to 64 for additional information

on the cloning processes. If the Wi-Fi Zone # in the TV is set to 0 (default), the TV will not obtain access

point login data from the Installer Menu profile with which it is configured unless the profile contains the

global Wi-Fi Zone 100. Any TV that does not find its matching Wi-Fi Zone # in the Clone file, but does find

the global Wi-Fi Zone 100, will be configured with the global access point login data.

Set the TV Zone # and/or Wi-Fi Zone # in the TV

You can set the TV Zone # and/or the Wi-Fi Zone # in the EZ-Manager Wizard (see “EZ-Manager Wizard”

on pages 19 to 27) or, if the TV is in Pass-through Mode, via the TV’s setup menus as described below.

Note that t

he following procedure can only be performed while the TV is in Pass-through Mode. You will also

be able to specify a Label (North, South, East, West) and Room Number for this TV, if desired.
1. Turn ON the TV.
2. Press

MENU

on the Installer Remote, and use the arrow navigation keys to select/highlight the

General

menu icon. Then, press

3. In the General Menu, use the Up/Down arrow keys to select

Room Info

, and then press

4. In the Room Info screen, complete the appropriate fields as described below. Use the

Up/Down arrow

keys on the Installer Remote to navigate between each of the fields.

•

Wi-Fi Zone: Enables you to set a Wi-Fi Zone # so that the TV can be configured with a particular

access point’s login data for wireless networking. Login data (i.e., SSID, security type, and security

key) may be provided in a

Clone/Configuration (.tlx) file

To assign a Wi-Fi Zone, select/highlight the

Wi-Fi Zone

field and press

. Then, use the Left/Right

arrow keys to specify the desired Wi-Fi Zone # (1–99). Press

when you are finished.

• TV

Zone: Enables you to set a TV Zone # so that the TV can be configured with Installer Menu

and/or Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or Setup

Menu settings may be provided in a Clone/Configuration (.tlx) file. If the TV is being configured for

FTG Mode via CPU, the TV Zone # setting also allows the TV to omit channels that have been

restricted in the FTG Channel Map (see “FTG Channel Map Zone Restrictions” on page 98).
To change the TV Zone, select/highlight the

TV Zone

field and press

. Then, use the Left/Right

arrow keys to specify the desired TV Zone # (0–8). Press

when you are finished

(Continued on next page)

Summary of Contents for 43UV770M




























































































































Search results

Summary of Contents for 43UV770M

Reviews:

Related manuals for 43UV770M

Brands by name

Popular brands

LG 43UV770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 43UV770M

Reviews:

Related manuals for 43UV770M

Brands by name

Popular brands