64
206-4324
Cloning Procedures (Cont.)
(Continued from previous page)
Note:
If the Target TV was previously in Pass-through Mode, and the
Clone/Configuration (.tlx)
file
that was imported contained an FTG Channel Map, the Target TV CPU is now in FTG Mode.
Upon restart, the TV tunes according to the Start Channel setting in the Installer Menu. If a Start
Channel is specified, the
TV will tune to that channel, though, in the case of FTG Mode via CPU
configuration, a channel banner will only be displayed if the Start Channel is included in the FTG
Channel Map (depending on your selection in step 10, the channel banner will display either the
Start Channel’s logical channel number or physical RF channel number). Otherwise, the TV will
either return to the last channel tuned (TV in Pass-through Mode) or tune to the first channel in the
FTG Channel Map (TV in FTG Mode via CPU). If the latter, remember that the channels in the FTG
Channel Map are always arranged in logical order, regardless of your selection in step 10.
