manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 785 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 785

784

5-2. Steps to take in an emergency

If the vehicle 12-volt battery is discharged

The following procedures may be used to start the hybrid system if the vehi-
cle’s 12-volt battery is discharged. 
You can also call your Lexus dealer or a qualified repair shop.

If you have a set of jumper (or booster) cables and a second vehicle
with a 12-volt battery, you can jump start your vehicle by following the
steps below.

Open the hood and remove the engine compartment covers.

 

(

P. 655)

Remove the fuse box cover and open the exclusive jump start-
ing terminal cover.

Connect the jumper cables according to the following procedure:

Connect a positive jumper cable clamp to the exclusive jump start-
ing terminal on your vehicle
Connect a positive jumper cable clamp to the positive (+) battery
terminal on the second vehicle
Connect a negative cable clamp to the negative (-) battery terminal
on the second vehicle
Connect the clamp at the other end of the negative cable to a solid,
stationary, unpainted metallic point away from the exclusive jump
starting terminal and any moving parts, as shown in the illustration.

STEP

1

STEP

2

STEP

3

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments