manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 153 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 153

153

1-8. Safety information

1

Be

fore
 driving

CAUTION

■

Child restraint precautions

Make sure you have complied with all installation instructions provided by the child
restraint manufacturer and that the system is properly secured. If it is not secured
properly, it may cause death or serious injury to the child in the event of a sudden
stop, sudden swerve or an accident.

■

When children are in the vehicle

Do not allow children to play with the seat belt. If the seat belt becomes twisted
around a child’s neck, it may lead to choking or other serious injuries that could
result in death. 
If this occurs and the buckle cannot be unfastened, scissors should be used to cut
the belt.

■

When the child restraint system is not in use

●

Keep the child restraint system properly secured on the seat even if it is not in use.
Do not store the child restraint system unsecured in the passenger compartment.

●

If it is necessary to detach the child restraint system, remove it from the vehicle or
store it securely in the luggage compartment. This will prevent it from injuring
passengers in the event of a sudden stop, sudden swerve or accident.

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments