manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 605 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 605

605

3-7. Other interior features

3

Interior fe

ature

s

Seat heaters and ventilators

■

Operating condition

The “POWER” switch is in ON mode.

■

When not in use

Set the knob at “0”. The indicator light turns off.

CAUTION

■

Burns

●

Use caution when seating the following persons in a seat with the seat heater on
to avoid the possibility of burns:
• Babies, small children, the elderly, the sick and the physically challenged
• Persons with sensitive skin
• Persons who are fatigued
• Persons who have taken alcohol or drugs that induce sleep (sleeping drugs,

cold remedies, etc.)

●

Do not cover the seat with anything when using the seat heater. 
Using the seat heater with a blanket or cushion increases the temperature of the
seat and may lead to overheating.

: If equipped

The seat heaters and ventilators heat the seats and maintain good airflow
by blowing air from the seats.

Turns the seat heater on

The indicator light comes on. 

The higher the number is, the

warmer the seat becomes.

Blows air from the seat

The indicator light comes on. 

The higher the number is, the

stronger the airflow becomes.

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments