manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 646 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 646

646

4-2. Maintenance

Vehicle exterior

Items

Check points

Doors

• Do the doors operate smoothly?

Engine hood

• Does the engine hood lock system 

work properly?

Fluid leaks

• There should not be any signs of 

fluid leakage after the vehicle has 
been parked.

Tires

• Is the tire inflation pressure cor-

rect?

• The tires should not be damaged or 

excessively worn.

• Have the tires been rotated 

according to the maintenance 
schedule?

• The wheel nuts should not be loose.

Windshield wipers

• The wiper blades should not show 

any signs of cracking, splitting, 
wear, contamination or deforma-
tion.

• The wiper blades should clear the 

windshield without streaking or 
skipping.

CAUTION

■

If the hybrid system is operating

Turn the hybrid system off and ensure that there is adequate ventilation before per-
forming maintenance checks.

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments