manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 341 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 341

341

3-1. Lexus Display Audio system

3

Interior fe

ature

s

■

Adjusting the volume

The volume of the Mobile Assistant can be adjusted using the 

“

PWR·VOL

”

 knob or

steering wheel volume switches. The Mobile Assistant and phone call volumes are
synchronized.

■

Microphone

●

Wait for the listening beeps before using the Mobile Assistant.

●

The Mobile Assistant may not recognize commands in the following situations:
• When spoken too quickly.
• When spoken at a low or high volume.
• When the roof or windows are open.
• When passengers are talking while the Mobile Assistant is being used.
• When the air conditioning system’s fan speed is set high.
• When the air conditioning vents are turned toward the microphone.

■

Mobile Assistant precautions

●

The available features and functions may vary based on the iOS version
installed on the connected device.

●

Some Siri features are limited in Eyes Free mode. If you attempt to use an
unavailable function, Siri will inform you that the function is not available.

●

If Siri is not enabled on the cellular phone connected via Bluetooth

®

, an error

message will be displayed on the screen.

●

While a phone call is active, the Mobile Assistant cannot be used. 

●

If using the navigation feature of the cellular phone, ensure the active audio
source is Bluetooth

®

 audio or iPod in order to hear turn by turn direction

prompts.

It is not necessary to speak directly into the
microphone when using the Mobile Assis-
tant. 

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments