manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 771 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 771

770

5-2. Steps to take in an emergency

Slightly loosen the wheel nuts (one
turn).

Turn the tire jack portion “A” by
hand until the notch of the jack is in
contact with the jack point.

Raise the vehicle until the tire is
slightly raised off the ground.

Remove all the wheel nuts and the
tire.

When resting the tire on the

ground, place the tire so that the

wheel design faces up to avoid

scratching the wheel surface.

STEP

2

STEP

3

STEP

4

STEP

5

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments