manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 234 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 234

234

2-4. Using other driving systems

■

Cruise control can be set when

●

The shift lever is in D or range 4 or higher of S has been selected. 

●

Vehicle speed is above 25 mph (40 km/h). 

■

Accelerating after setting the vehicle speed

●

The vehicle can be accelerated normally. After acceleration, the set speed
resumes.

●

Even without canceling the cruise control, the set speed can be increased by
first accelerating the vehicle to the desired speed and then pushing the lever
down to set the new speed.

■

Automatic cruise control cancelation

Cruise control will stop maintaining the vehicle speed in any of the following situa-
tions.

●

Actual vehicle speed falls more than approximately 10 mph (16 km/h) below the
preset vehicle speed. 
At this time, the memorized set speed is not retained.

●

Actual vehicle speed is below approximately 25 mph (40 km/h).

●

VSC is activated.

■

Canceling and resuming the constant speed control

Pulling the lever toward you
cancels the constant speed
control.

The speed setting is also can-

celed when the brakes are

applied.

Pushing the lever up resumes
the constant speed control.

Resuming is available when the

vehicle speed is more than

approximately 25 mph (40

km/h).

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments