manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 351 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 351

351

3-2. Using the air conditioning system and defogger

3

Interior fe

ature

s

Using the automatic air conditioning system

Press  

.

The air conditioning system begins to operate. Air outlets and fan
speed are automatically adjusted according to the temperature
setting.

Press 

on 

 to increase the temperature and 

 to

decrease the temperature.

When 

 is pressed (the indicator on 

 is on) or the passen-

ger’s side temperature control button is pressed, the temperature for

the driver and passenger seats can be adjusted separately.

■

Automatic mode indicator

If fan speed setting or air flow modes are operated, the automatic
mode indicator goes off. However, automatic mode for functions other
than that operated are maintained.

Adjusting the settings manually

■

Basic setting

To turn on the air conditioning system and adjust the fan speed,
press 

 on 

 to increase the fan speed and 

 to

decrease the fan speed.

To turn the fan off, press 

.

To adjust the temperature setting, press 

 on 

 to increase

the temperature and 

 to decrease the temperature.

When 

 is pressed (the indicator on 

 is on) or the passen-

ger’s side temperature control button is pressed, the temperature for

the driver and passenger seats can be adjusted separately.

STEP

1

STEP

2

STEP

1

STEP

2

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments