Lexus rx450h 2015 Owner'S Manual Download Page 433

Page: 433 / 878

433

3-3. Using the Lexus Display Audio system

Interior fe

ature

■

About the phonebook in this system

The following data is stored for every registered phone. When another phone is
connecting, you cannot read the registered data.

●

Phonebook data

●

Call history date

●

Speed dial

When you delete the phone, the above-mentioned data is also deleted.

■

When you release your car

Be sure to initialize your data. (



P. 336)

■

About Bluetooth

■

Compatible models

This system supports the following service.

●

Bluetooth

Specification:

Ver. 1.1 or higher (Recommended: Ver. 2.1+EDR or higher)

●

Profiles:
• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.5 or

higher)
This is a profile to allow hands-free phone calls using the mobile phone or
head sets. It has an outgoing and incoming call function.

• OPP (Object Push Profile) Ver. 1.1 or higher

This is a profile to exchange phonebook data. When the Bluetooth

phone

has PBAP and OPP, OPP cannot be used.

• PBAP (Phone Book Access Profile) Ver. 1.0 or higher

This is a profile to transfer phonebook data.

If your mobile phone does not support HFP, you cannot enter the Bluetooth

phone. You need to take OPP or PBAP service individually.

Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for rx450h 2015

Reviews:

Lexus rx450h 2015, Owner'S Manual, Page: 433 / 878

Search results

Summary of Contents for rx450h 2015

Reviews: