manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 734 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 734

5

Wh
en trouble 

aris
es

733

5-2. Steps to take in an emergency

If a warning light turns on or a warning buzzer sounds...

Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.

The following warning indicates a possible problem in the brake system.
Immediately stop the vehicle in a safe place and contact your Lexus
dealer.

*

: Parking brake engaged warning buzzer

P. 748

Stop the vehicle immediately.

The following warning indicates the possibility of damage to the vehicle
that may lead to an accident. Immediately stop the vehicle in a safe place
and contact your Lexus dealer.

Warning light

Warning light/Details

 (U.S.A.)

 (Canada)

Brake system warning light (warning buzzer)

*

• Low  brake  fluid
• Malfunction in the brake system

This light also comes on when the parking brake is not 
released. If the light turns off after the parking brake is fully 
released the system is operating normally.

Warning light

Warning light/Details

Charging system warning light

Indicates a malfunction in the vehicle’s charging system

Calmly perform the following actions if any of the warning lights comes on
or flashes. If a light comes on or flashes, but then goes off, this does not nec-
essarily indicate a malfunction in the system.

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments