manualshive.com logo in svg

Lexus rx450h 2015, Owner'S Manual, Page: 306 / 878

Share
Download
Lexus rx450h 2015 Owner'S Manual Download Page 306

306

2-5. Driving information

Trailer towing (AWD models with towing package)

Towing related terms

■

GCWR (Gross Combination Weight Rating)

The maximum allowable gross
combination weight. The gross
combination weight is the sum of
the total vehicle weight (including
the occupants, cargo and any
optional equipment installed on
the vehicle) and the weight of the
trailer being towed (including the
cargo in the trailer).

Your vehicle is designed primarily as a passenger-and-load-carrying vehi-
cle. Towing a trailer can have an adverse impact on handling, performance,
braking, durability, and fuel consumption. For your safety and the safety of
others, you must not overload your vehicle or trailer. You must also ensure
that you are using appropriate towing equipment, that the towing equip-
ment has been installed correctly and used properly, and that you employ
the requisite driving habits.

Vehicle-trailer stability and braking performance are affected by trailer
stability, brake performance and setting, trailer brakes, the hitch and hitch
systems (if equipped).

To tow a trailer safely, use extreme care and drive the vehicle in accor-
dance with your trailer’s characteristics and operating conditions.

Lexus warranties do not apply to damage or malfunction caused by towing
a trailer for commercial purposes.

Contact your Lexus dealer for further information about additional
requirements such as towing kits, etc.

Summary of Contents for rx450h 2015















































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments