Lexus ES330 2005 Owner'S Manual Download Page 318

Page: 318 / 438

IN CASE OF AN EMERGENCY

301

40E128

Discharged battery

Booster battery

JUMP STARTING PROCEDURE

1. If the booster battery is installed in another vehicle, make

sure the vehicles are not touching. Turn off all unnecessary

lights and accessories.
When boosting, use the battery of matching or higher quality.

Any other battery may be difficult to jump start with.
If jump starting is difficult, charge the battery for several

minutes.
2. If required, remove all the vent plugs from the booster

battery. Lay a cloth over the open vents on the booster battery.

(This helps reduce the explosion hazard, personal injuries and

burns.)
If the booster battery is an extended maintenance interval

battery, it is not necessary to remove the vent plugs.
3. If the engine in the vehicle with the booster battery is not

running, start it and let it run for about 5 minutes. During jump

starting, run the engine at about 2000 rpm with the accelerator

pedal lightly depressed.

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands