Lexus ES330 2005 Owner'S Manual Download Page 107

Page: 107 / 438

EXTERIOR EQUIPMENT

HOOD

1. To open the hood, pull the hood lock release lever under
the instrument panel. The hood will spring up slightly.

2. Insert your fingers under the hood, push up the
auxiliary catch lever and lift the hood.

Before closing the hood, check to see that you have not

forgotten any tools, rags, etc. Then lower the hood and make

sure it locks.

CAUTION

Before driving, be sure that the hood is securely locked.
Otherwise, the hood may open unexpectedly while
driving and an accident may occur.

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands