Lexus ES330 2005 Owner'S Manual Download Page 325

Page: 325 / 438

IN CASE OF AN EMERGENCY

308

3. Block the wheel diagonally opposite the flat tire
to keep the vehicle from rolling when it is jacked
up.

When blocking the wheel, place a wheel block in front

of one of the front wheels or behind one of the rear

wheels.

4. Loosen all the wheel nuts.

Always loosen the wheel nuts before raising the

vehicle.
Turn the wheel nuts counterclockwise to loosen them.

To get maximum leverage, fit the wrench to the nut

so that the handle is on the right side, as shown

above. Grab the wrench near the end of the handle

and pull up on the handle. Be careful that the wrench

does not slip off the nut.

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands