Lexus ES330 2005 Owner'S Manual Download Page 297

Page: 297 / 438

DRIVING TIPS

280

BREAK−IN PERIOD

Drive gently and avoid high speeds.

You need not follow a break

−

in schedule with your new Lexus.

But following a few simple tips for the first 1600 km (1000 miles)

can add to the future economy and long life of your vehicle:

Avoid full throttle acceleration when starting and driving.

Avoid racing the engine.

Try to avoid hard stops during the first 300 km (200 miles).

Do not drive for a long time at any single speed, either fast

or slow.

Do not tow a trailer during the first 800 km (500 miles).

OPERATION IN FOREIGN

COUNTRIES

If you plan to drive your Lexus in another country...

First,

comply with the vehicle registration laws.

Second,

confirm the availability of the correct fuel (unleaded

and minimum octane rating).

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands