Lexus ES330 2005 Owner'S Manual Download Page 39

Page: 39 / 438

KEYS AND DOORS

3. Open and remove the battery case cover using a coin.
4. Remove the discharged battery and put in a new battery

with the positive side up.

NOTICE

Make sure the positive side and negative side of the
battery are faced correctly.

Do not replace the battery with wet hands. Water may
cause unexpected rust.

Do not touch or move any components inside the
transmitter, or it may interfere with proper operation.

Be careful not to bend the electrode when inserting
the battery and that dust or oils do not adhere to the
inside of the module.

Take care not to lose the screws.

5. Replace the battery case cover.
6. Install the module into the key frame and secure the cover

with the screw.
7. When pushing any button on the wireless key, make sure

the indicator light comes on.

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands