Lexmark XC2326 User Manual Download Page 91

Page: 91 / 254

Menu item

Description

Wait Timeout Time

15–65535 (40*)

Set the time in seconds for the printer to wait for more data before
canceling a print job.

Note:

This menu item appears only when Wait Timeout is enabled.

Note:

An asterisk (*) next to a value indicates the factory default setting.

PCL

Menu item

Description

Font Name

[List of available fonts] (Courier*)

Select a font from the speciﬁed font source.

Symbol Set

[List of available symbol set] (10U
PC

‑

8*)

Specify the symbol set for each font name.

Note:

A symbol set is a set of alphabetic and numeric characters,

punctuation, and special symbols. Symbol sets support the different
languages or speciﬁc programs such as math symbols for scientiﬁc text.

Pitch

0.08–100.00 (10.00*)

Specify the pitch for ﬁxed or monospaced fonts.

Note:

Pitch refers to the number of ﬁxed

‑

space characters in a horizontal

inch of type.

Orientation

Portrait*

Landscape

Reverse Portrait

Reverse Landscape

Specify the orientation of text and graphics on the page.

Lines per Page

1–255

Specify the number of lines of text for each page printed through the PCL®
data stream.

Notes:

•

This menu item activates vertical escapement that causes the
selected number of requested lines to print between the default
margins of the page.

•

60 is the U.S. factory default setting. 64 is the international factory
default setting.

PCL5 Minimum Line Width

1–30 (2*)

Set the initial minimum stroke width.

PCLXL Minimum Line Width

1–30 (2*)

A4 Width

198 mm*

203 mm

Set the width of the logical page on A4

‑

size paper.

Note:

Logical page is the space on the physical page where data is

printed.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

Summary of Contents for XC2326































































































































































































































































Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands

Lexmark XC2326, User Manual

Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands