Lexmark XC2326 User Manual Download Page 136

Page: 136 / 254

Menu item

Description

Default Print Permission Login

Shows the default permission used for the user to print.

Note:

This setting shows only when one or more Login Methods are created.

Security Reset Jumper

Enable “Guest” access*

No Effect

Specify user access to the printer.

Notes:

•

The jumper is located beside a lock icon on the controller board.

•

Enable “Guest” access gives anyone access to all aspects of the printer.

•

No Effect may make access to the printer impossible when the required
security information is unavailable.

Minimum Password Length

0–32

Specify the password length.

Enable Password/PIN Reveal

Show the password or personal identiﬁcation number.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Cloud Connector

Menu item

Description

Enable/Disable Connectors

Enable a cloud storage provider.

Reports

Menu Settings Page

Menu item

Description

Menu Settings Page

Print a report that contains the printer menus.

Device

Menu item

Description

Device Information

Print a report that contains information about the printer.

Device Statistics

Print a report about printer usage and supply status.

Proﬁle List

Print a list of proﬁles that are stored in the printer.

Asset Report

Print a report that contains the printer serial number and model name.

Use printer menus

136

Summary of Contents for XC2326































































































































































































































































Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands

Lexmark XC2326, User Manual

Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands