Lexmark XC2326 User Manual Download Page 165 | Manualshive

Page: 165 / 254

background image

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

•

If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in ﬂooring.

•

If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove
the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same
time.

•

Always use the handholds on the printer to lift it.

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

Note:

Damage to the printer caused by improper moving is not covered by the printer warranty.

Shipping the printer

For shipping instructions, go to

http://support.lexmark.com

or contact customer support.

Maintain the printer

165

«
...
163
164
165
166
167
...
»

Summary of Contents for XC2326































































































































































































































































Reviews:

No comments

Related manuals for XC2326

Brand: Xerox Pages: 73

Brand: Xerox Pages: 2

Brand: DataCard Pages: 2

Brand: Oki Pages: 40

Brand: Fastjet Pages: 52

Brand: Lanier Pages: 265

Brand: Oki Pages: 154

Brand: Oki Pages: 121

Brand: Oki Pages: 96

Brand: Olympus Pages: 2

WorkCentre 7800 series

Brand: Xerox Pages: 14

WORKCENTRE 7775

Brand: Xerox Pages: 15

WORKCENTRE 7775

Brand: Xerox Pages: 24

WORKCENTRE 7755

Brand: Xerox Pages: 252

WORKCENTRE 7755

Brand: Xerox Pages: 15

WORKCENTRE 7755

Brand: Xerox Pages: 40

WorkCentre 5019

Brand: Xerox Pages: 50

versalink C7020

Brand: Xerox Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands