Lexmark X860de User Manual Download Page 191

Page: 191 / 311

Menu item

Description

Annotations

Do Not Print
Print

Prints annotations in a PDF

Note:

Do Not Print is the factory default setting.

PostScript menu

Menu item

Description

Print PS Error

On
Off

Prints a page containing the PostScript error

Note:

Off is the factory default setting.

Font Priority

Resident
Flash/Disk

Establishes the font search order

Notes:

•

Resident is the factory default setting.

•

A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
available.

•

The flash memory option or printer hard disk cannot be Read/Write,
Write, or password protected.

•

Job Buffer Size must not be set to 100%.

PCL Emul menu

Menu item

Description

Font Source

Resident
Disk
Download
Flash
All

Specifies the set of fonts used by the Font Name menu item

Notes:

•

Resident is the factory default setting. It shows the factory default set of
fonts downloaded into printer RAM.

•

Flash and Disk settings appear only if applicable and show all fonts
resident in that option.

•

Flash and Disk options must be properly formatted and cannot be
Read/Write, Write, or password protected.

•

Download appears only if applicable and shows all the fonts downloaded
into printer RAM.

•

All shows all fonts available to any option.

Font Name

Identifies a specific font and the option where it is stored

Notes:

•

Courier 10 is the factory default setting.

•

The font source abbreviation is R for Resident, F for Flash, K for Disk, and
D for download.

Understanding printer menus

191

Summary of Contents for X860de
























































































































































































































































































































Search results

Summary of Contents for X860de

Reviews:

Brands by name

Popular brands

Lexmark X860de, User Manual

Search results

Summary of Contents for X860de

Reviews:

Brands by name

Popular brands