Lexmark X860de, User Manual

Page: 121 / 311

Scanning to an FTP address using a shortcut number
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
Press # , and then enter the FTP shortcut number.
4
Touch Send It .
Scanning to an FTP address using the address book
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
On the home screen, touch FTP .
4
Touch Search Address Book .
5
Type the name or part of the name you are searching for, and then touch Search .
6
Touch the name that you want to add to the To: field.
7
Touch Send It .
Creating shortcuts
Instead of entering the entire FTP site address on the control panel each time you want to send a document to an FTP
server, you can create a permanent FTP destination and assign a shortcut number. There are two methods for creating
shortcut numbers: using a computer and using the printer touch screen.
Creating an FTP shortcut using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2
Click Settings .
3
Under Other Settings, click Manage Shortcuts .
Note: A password may be required. If you do not have an ID and password, get one from your system support
person.
4
Click FTP Shortcut Setup .
5
Enter the appropriate information into the boxes.
Scanning to an FTP address 121