Lexmark X548 Series Service Manual Download Page 323

Page: 323 / 347

Preventive maintenance

6-3

7525-63

Go Back

Cleaning the scanner glass

Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.

Note:

Clean both areas of the scanner glass and both white underside areas.

Slightly dampen a soft, lint-free cloth or paper towel with water.

Open the scanner cover.

Wipe the scanner glass until it is clean and dry.

Wipe the white underside of the scanner cover until it is clean and dry.

Close the scanner cover.

Part name

White underside ADF cover

White underside scanner glass cover

Scanner glass

ADF glass

Summary of Contents for X548 Series




























































































































































































































































































































































Search results

Summary of Contents for X548 Series

Reviews:

Related manuals for X548 Series

Brands by name

Popular brands

Lexmark X548 Series, Service Manual

Search results

Summary of Contents for X548 Series

Reviews:

Related manuals for X548 Series

Brands by name

Popular brands