Lexmark X548 Series, Service Manual

Page: 154 / 347

3-38
Service Manual
7525-63 x
Go Back
Previous
Next
ADF Edge Erase
This menu item sets the size, in millimeters, of the no-print area around an ADF scan job. All copy jobs have a
two-millimeter minimum border. Copy jobs will use the setting or two millimeters, whichever is larger.
To adjust this setting:
1.
Navigate to
ADF Edge Erase
.
2.
Touch or to adjust the setting.
3.
Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
FB Edge Erase
This menu item sets the size, in millimeters, of the no print are around a flatbed scan job. All copy jobs have a
two- millimeter minimum border. Copy jobs will use the setting or two millimeters, whichever is larger
To adjust this setting:
1. Navigate to
FB Edge Erase
.
2. Touch or to adjust the setting.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
Scanner Manual Registration
This item is used to manually register the flatbed and ADF on the MFP’s scanner unit. Registration should be
performed whenever the ADF unit, flatbed unit, or controller card are replaced.
To manually register the ADF:
1.
Navigate to
Scanner Manual Registration > Print Quick Test
to print a Quick Test page.
2.
To view the ADF’s current registration:
•
Place the Quick Test page in the ADF with the image facing up, and touch
Copy Quick Test
to view
the frontside registration.
• Place the Quick Test page in the ADF with the image facing down, and touch
Copy Quick Test
to
view the backside registration.
3.
To adjust the ADF’s registration:
•
Touch
ADF Front
to adjust the frontside registration.
•
Touch
ADF Back
to adjust the backside registration.
4.
Touch or to adjust the settings for the Horizontal Adjust or the Top Margin.
5.
Touch
Submit
to save the changes or touch
Back
to return to
Scanner Manual Registration
without
saving any changes.
6. Repeat step 2 to verify the adjustments.
7. Repeat steps 1–6 to make further adjustments.
To manually register the flatbed:
1. Navigate to
Scanner Manual Registration > Print Quick Test
to print a Quick Test page.
2. Remove all pages from the ADF.
3. Place the Quick Test page on the flatbed, and touch
Copy Quick Test
to view the flatbed’s current
registration. The printer performs a mono, text mode scan.
4.
Touch
Flatbed
to adjust the flatbed’s registration.
5.
Touch or to adjust the settings for the Left Margin or the Top Margin.
6.
Touch
Submit
to save the changes, or touch
Back
to return to
Scanner Manual Registration
without
saving any changes.
7. Repeat step 3 to verify the adjustments.
8. Repeat steps 1–7 to make further adjustments.