Lexmark X548 Series, Service Manual

Page: 152 / 347

3-36
Service Manual
7525-63 x
Go Back
Previous
Next
To reset factory defaults:
1. Navigate to
Factory Defaults
.
2. Choose the setting to reset:
•
Restore Base
—resets all non-critical base NVRAM settings
•
Restore STD NET
—resets the eSF configuration
•
Restore LES
—resets all network NVRAM settings
3.
Restoring Factory Defaults
appears, followed by
Resetting the Device
. The printer performs a POR.
Energy Conserve
Affects the values that display in the Sleep Mode setting in the General Settings Menu. This menu item appears
only when the printer model does not support Automatic Power Saver or has deactivated Automatic Power
Saver. The menu item affects only the values that are displayed in the Power Saver menu item.
Select
Off
in Energy Conserve to allow Power Saver in the customer menu to display Disable as an option. If
Disable
is selected in the customer Power Saver, the printer deactivates the Power Saver feature. Select
On
(the default) in Energy Conserve to prevent
Disable
from appearing as an option in the Power Saver setting,
and preventing the customer from turning off Power Saver.
To change this setting:
1. Navigate to
Energy Conserve
.
2. Touch or to change the setting.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
Fax Low Power Support
To change this setting:
1. Navigate to
Fax Low Power Support
.
2. Touch or to change the setting.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
Min Copy Memory
This setting allocates the amount of DRAM memory to be used for storing copy jobs in the priority queue. 25,
35,50,80 and 100 MB are the available settings. 80 MB is the default setting.
To adjust this setting:
1.
Navigate to
Min Copy Memory
.
2.
Touch or to adjust the setting.
3.
Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.