Lexmark C792 Family, Service Manual

Page: 91 / 705

Diagnostic information
2-51
5062
Go Back
Previous
Next
User messages
User prompts
Error code Action
Close Front Door Close the front door securely. If you continuously get this error, then the interlock switch may
be bad. See
“Interlock switch error service check” on page 2-155 .
Close Side Door Close the side door securely. If you continuously get this error, then the interlock switch may
be bad. See
“Interlock switch error service check” on page 2-155 .
Disk Corrupted,
Reformat? The printer has attempted a disk recovery and cannot repair the disk. The disk must be
formatted to use.
Warning: All files stored on the disk will be lost.
Held Jobs May Not Be
Restored The printer has attempted to restore Held jobs, but not all were restored.
Insert Tray <x> Insert tray to clear the message.
Load <source>
<custom type name>
Load paper in the indicated source and of the indicated type. Additional messages may
include:
• Paper loaded—Select Continue .
• Show Me—The printer will present instructions.
• Cancel Job—The printer job can be canceled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load <source>
<Custom String> Load paper in the indicated source, and select Continue .
Additional messages may include:
• Show Me—The printer will present instructions.
• Cancel Job—The printer job can be canceled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load <source> <size> Load paper in the indicated source and of the indicated size, and select Continue .
Additional messages may include:
• Show Me—The printer will present instructions.
• Cancel Job—The printer job can be canceled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load Manual <custom
type name> If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
pressing
Select indicates to the printer it should search for a source with the proper custom
type.
Additional messages may include:
• Show Me—The printer will present instructions.
• Cancel Job—The printer job can be canceled.
Load Manual
<custom string>
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
pressing
Select indicates to the printer it should search for a source with the proper custom
string.
Additional messages may include:
• Show Me—The printer will present instructions.
• Cancel Job—The printer job can be canceled.