3
Width guide
4
Feeder extender
5
Paper size indicator
6
Load the paper, and then adjust the width guide to lightly touch the edge of the paper stack.
•
Load paper, card stock, and transparencies with the recommended printable side facedown and the top
edge entering the printer first.
•
Load envelopes with the flap side up and against the right side of the paper guide.
Notes:
•
Do not load or close the multipurpose feeder while a job is printing.
•
Load only one size and type of paper at a time.
•
Paper should lie flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose
feeder and is not bent or wrinkled.
7
From the printer control panel, set the paper size and type in the Paper menu to match the paper loaded in
the tray.
Loading the manual feeder
The standard 250
‑
sheet tray has an integrated manual feeder that can be used to print on different types of
paper one sheet at a time.
1
Load a sheet of paper into the manual feeder:
•
Printable side facedown for one-sided printing
•
Printable side faceup for two
‑
sided (duplex) printing
Note:
There are different ways for loading letterhead depending on the mode of printing.
Loading paper and specialty media
47
Summary of Contents for C2132
