Lexmark 17J0050 - C 752n Color Laser Printer User Reference Download

Page: 77 / 160

Canceling Fax

The printer is processing a request to
cancel a fax job.

Wait for the message to clear.

Canceling Job

The printer is processing a request to
cancel the current print job.

Wait for the message to clear.

See also:

Canceling a print job

Change <x>

The printer is requesting that a
different type of paper be loaded in
one of the input sources.

Change the paper type in the specified
source.

See also:

Loading the trays

; Setup Guide

Check <device>
Connection

The specified device is either not fully
connected to the printer or is
experiencing a hardware failure.

• Reestablish communication by removing

the specified device and reattaching it to
the printer.

• Press Go to clear the message and

continue printing.

• In the case of a hardware failure, turn

the printer off and back on. If the error
recurs, turn the printer off, remove the
specified device, and call for service.

Clearing Job
Accounting Stat

The printer is deleting all job statistics
stored on the hard disk.

Wait for the message to clear.

Close Door

The printer front cover is open.

Close the printer front cover to clear the
message.

Close Finisher Door

The finisher front door is open.

Close the finisher front door to clear the
message.

Close Tray X Door

The 2000-sheet drawer is open.

Close the 2000-sheet drawer to clear the
message.

Copying

The printer is processing a copy job
originating from an OptraImage™
scanner.

Wait for the message to clear.

Defragmenting

The printer is defragmenting the flash
memory to reclaim storage space
occupied by deleted resources.

Wait for the message to clear.

Warning:

Do not turn the printer off while

this message is displayed.

Delete All Jobs

The printer is requesting confirmation
to delete all held jobs.

• Press Go to continue. The printer

deletes all held jobs.

• Press Stop to cancel the operation.

Deleting Jobs

The printer is deleting one or more
held jobs.

Wait for the message to clear.

Disabling Menus

The printer is responding to a request
to disable the menus.

Wait for the message to clear.

Note: While the menus are disabled, you
cannot change the printer settings from the
operator panel.

See also:

Disabling the operator panel

menus

Disk Corrupted.
Reformat?

The printer has attempted a disk
recovery process and cannot repair
the disk.

• Press Go to reformat the disk and delete

all files currently stored on the disk.

• Press Stop to clear the message without

reformatting the disk. The printer may
display

Disk Recovery

and attempt to

recover the disk.

See also:

Disk Recovery x/5 yyy%

Message

What this message means

What you can do

Summary of Contents for 17J0050 - C 752n Color Laser Printer

































































































































































Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands

Lexmark 17J0050 - C 752n Color Laser Printer, User Reference

Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands