Lexmark 17J0050 - C 752n Color Laser Printer User Reference Download

Page: 113 / 160

113

Remove the photoconductor drum cover and unwrap the blanket.

Warning:

Do not touch the photoconductor drum on the bottom of the print cartridge.

Place the cartridge on the guides of its color-coded opening, and then slide it into the printer. The
cartridge drops slightly and clicks into place.

Close the front cover.

Warning:

If the front cover does not close completely, reopen the door. Press in firmly on the
cartridges to make sure they are correctly seated.

Turn the printer on.

Summary of Contents for 17J0050 - C 752n Color Laser Printer

































































































































































Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands

Lexmark 17J0050 - C 752n Color Laser Printer, User Reference

Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands