Lexmark 17J0050 - C 752n Color Laser Printer User Reference Download

Page: 150 / 160

150

Restoring factory default settings

Make sure the printer is on and the

Ready

message appears.

Press

Menu

until you see Utilities Menu, and then press

Select

Press

Menu

until you see Factory Defaults, and then press

Select

When Restore appears, press

Select

. The message

Restoring Factory Defaults

appears,

followed by the

Ready

message.

When you select Restore:

–

No other button actions are available on the operator panel while

Restoring Factory

Defaults

appears.

–

All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are
deleted. (Resources residing in flash memory or on the optional hard disk are unaffected.)

–

All menu settings are returned to the factory default values, except:

•

The operator panel Display Language setting in the Setup Menu.

•

All settings in the Parallel Menu, Serial Menu, Network Menu, and USB Menu.

If you need more information about changing menu settings or selecting new user default settings, see

Changing menu settings

Summary of Contents for 17J0050 - C 752n Color Laser Printer

































































































































































Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands

Lexmark 17J0050 - C 752n Color Laser Printer, User Reference

Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands