Lexmark 17J0050 - C 752n Color Laser Printer User Reference Download

Page: 72 / 160

Supplies Menu

The Supplies Menu provides information about printer supplies that require attention. It is only available
when a supply is low or needs replacement.

USB Menu

Use the USB Menu to change printer settings affecting a Universal Serial Bus (USB) port (USB
Option <x>).

Note: Values marked by an asterisk (*) are the factory default settings.

Menu Item

Purpose

Values

<color>
Toner

To view the status of the color print
cartridges.

Low

Change Cartridge

Oiler

To view the status of the web oiler.

Near Exhausted

Waste Bottle

To view the status of the toner waste
container.

Note: Once the toner waste container
reaches Full, the printer will print up to
15 more pages from the buffer and
then stop until the container is
replaced.

Near Full

The toner waste container is nearly
full.

Menu Item

Purpose

Values

Job
Buffering

To temporarily store jobs on the printer
hard disk before printing.

Note: Changing the Job Buffering
menu item automatically resets the
printer.

Off*

Does not buffer print jobs to the hard
disk.

Buffers print jobs to the hard disk.

Auto

Buffers print jobs only if the printer is
busy processing data from another
input port.

MAC Binary
PS

To configure the printer to process
Macintosh binary PostScript print jobs.

Off

Printer processes raw binary
PostScript print jobs from computers
using the Macintosh operating system.

Note: This setting often causes
Windows print jobs to fail.

Printer filters PostScript print jobs
using standard protocol.

Auto*

Printer processes print jobs from
computers using either Windows or
Macintosh operating systems.

Summary of Contents for 17J0050 - C 752n Color Laser Printer

































































































































































Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands

Lexmark 17J0050 - C 752n Color Laser Printer, User Reference

Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands