Lexmark 17J0050 - C 752n Color Laser Printer User Reference Download

Page: 144 / 160

144

Print irregularities

• Paper has absorbed moisture

due to high humidity.

• You are using paper that does

not meet the printer
specifications.

• The image transfer unit and

transfer roller are worn or
defective.

• The fuser is worn or defective.

• Load paper from a fresh package in the paper

tray.

• Avoid textured paper with rough finishes.
• Make sure the printer’s paper type setting

matches the type of paper you are using.

• Replace the image transfer unit and transfer

roller.

• Replace the fuser.

Print too light

• The Toner Darkness setting is

too light.

• You are using paper that does

not meet the printer
specifications.

• The print cartridges are low on

toner.

• The print cartridges are

defective or have been installed
in more than one printer.

• Select a different Toner Darkness setting from the

printer driver before sending the job to print.

• Perform a Color Adjust in the Utilities Menu.
• Load paper from a new package.
• Avoid textured paper with rough finishes.
• Make sure the paper you load in the trays is not

damp.

• Replace the print cartridges.

Print too dark

• The Toner Darkness setting is

too dark.

• The print cartridges are

defective.

• Select a different Toner Darkness setting from the

printer driver before sending the job to print.

• Replace the print cartridges.

Transparency print
quality is poor

(Print has inappropriate
light or dark spots, toner
is smeared, horizontal or
vertical light bands
appear, or color does not
project.)

• You are using transparencies

that do not meet the printer
specifications.

• The Paper Type setting for the

tray you are using is set to
something other than
transparency.

• Use only transparencies recommended by the

printer’s manufacturer.

• Make sure the Paper Type setting is set to

transparency.

Toner specks

• The print cartridges are

defective.

• The transfer roller is worn or

defective.

• The image transfer unit is worn

or defective.

• The fuser is worn or defective.
• Toner is in the paper path.

• Replace the print cartridges.
• Replace the transfer roller.
• Replace the image transfer unit.
• Replace the fuser.
• Call for service.

Symptom

Cause

Solution

ABCDE
ABCDE
ABCDE

Summary of Contents for 17J0050 - C 752n Color Laser Printer

































































































































































Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands

Lexmark 17J0050 - C 752n Color Laser Printer, User Reference

Search results

Summary of Contents for 17J0050 - C 752n Color Laser Printer

Reviews:

Related manuals for 17J0050 - C 752n Color Laser Printer

Brands by name

Popular brands