Leviton PICCOLO SCAN, User Manual, Page: 61 / 74

Menus
55
21.6.3. Delete Console Show (Menu 72)
Use this command to delete all stored show data in the console but maintain
setup configurations. Also see section 19 .
Deletes:
•
All groups, cues, effects, pages and macros.
•
User shapes and libraries.
•
Channel and fixture patches.
•
Event list and time code configuration.
Does not delete:
•
Setup data.
•
Fixtures patch cache.
•
Dmx-In configuration.
•
MIDI chart and configuration.
•
Ethernet configuration.
21.6.4. Security & Defaults (Menu 77)
The console can store a user defined channel and fixture patch as default. The patch will be loaded
automatically when the console is reset. This function is useful for lighting system installers and can be
password protected.
Security:
Use to set a
password
to protect the user default patch. If the password is
Enabled,
it will not be
possible to change the patch back to factory default status unless password is disabled again.
Saved: To store a user default patch, select
0:SAVE
(with
password Enabled
).
Load at RST:
When
Enabled
, the saved patch will be loaded when the console is reset.
21.6.5. Tools & Software Updates (Menu 79)
See section 22.2.5
21.6.6. Tests (Menus 80 - 88)
These menus are used to test certain console functions. Note that these tests interrupt the console’s
working mode. Do not test any functions during a show! To exit from any test procedure, press [EXIT].
Inputs
: Tests faders, keys and wheel functions. To test, move or press desired item.
Outputs
: Tests console LED’s, display, work lights and beep functions. To test, use the arrow keys to select
desired item.
Vga & Display
: Tests the external monitor and LCD display (colors, text).
Dmx In
: Displays the DMX-IN signal (even if deactivated in [Menu][03]).
Dmx Out
: Displays the DMX-OUT signal.
Memory
: Tests the system data memory.
Midi:
Tests the MIDI port. During the test, follow the on-screen procedure.
LT-Link
: Test the LT-LINK port. During the test, follow the on-screen procedure.