
Using Submasters
23
12. Using Submasters (Theatre & Manual Modes)
Submasters can be loaded with groups and cues for playback. Playback is executed manually with a
submaster fader or automatically by pressing the [S#] key located above the fader.
The output level of all submasters is controlled by the grandmaster GM and its blackout key.
Submaster output is also controlled by the SM and its blackout key (to change SM blackout key
configuration, press [Menu][31]).
Each submaster consists of:
A status LED that indicates:
Off - for submasters with no content.
On at 50% - for loaded but not active submasters.
On at 100% - for loaded and active submasters.
Blinking - for loaded and active timed submasters.
A submaster key ([S1], [S2], etc.) that can operate in GO, FLASH or SOLO modes (see
section
12.2
). This key is also used to load and delete submaster contents.
A fader (S1 , S2 , etc.) that is used to manually operate the submaster (with group or cue
loaded).
12.1. Loading Groups and Cues into Submasters
Use any of the following commands to load groups and cues into submasters:
To load a group # into a submaster:
Press [GRP][#][LOAD][S#].
To record a new group with the current scene and
load the group into a submaster:
Press [LOAD][S#].
To load a cue # into a submaster:
Press [CUE][#][LOAD][S#].
To load a group range into consecutive submasters:
Press [GRP][#][THRU][#][LOAD][S#].
To load a cue range into consecutive submasters:
Press [CUE][#][THRU][#][LOAD][LOAD][S#].
To load a group in Absolute or Inhibit modes:
1:Absolute or 2: Inhibit (see Normal, Absolute, or
Inhibit modes, see
section 12.2.1
below.
Press [GRP][#][LOAD][LOAD][S#] or
[GRP][#][LOAD][LOAD][LOAD][S#].
To load a cue in Absolute or Inhibit modes:
4:Absolute or 5: Inhibit (see Normal, Absolute, or
Inhibit modes, see
section 12.2.1
below.
Press [CUE][#][LOAD][LOAD][S#] or
[CUE][#][LOAD]]LOAD][LOAD][S#].
Load window options can also be selected by entering the index # or using the encoder.
In the below example, subs 01 to 03 are loaded with groups, while subs 04 to 10 are loaded with cues:
Summary of Contents for PICCOLO SCAN
Page 72: ...Leviton Piccolo Scan 66...
Page 73: ...67...