manualshive.com logo in svg

Leviton PICCOLO SCAN, User Manual, Page: 20 / 74

Share
Download
Leviton PICCOLO SCAN User Manual Download Page 20

Leviton Piccolo Scan                                                                                                          

 

 

14 

8. Operating Modes 

 

The console offers four operating modes: Single, Double, Theatre and Manual. 

8.1. Single Mode 

All faders (C#  & S# ) operate as individual channel faders. This mode is ideal for cue creation and 

working with static scenes. Single mode is useful for editing because all channels are accessible using all 

faders. In single mode, the crossfader is active but the submasters are not.  

8.2. Double Mode 

The upper and lower rows of console faders (C#  & S# ) operate as identical channel faders. With 

Double Mode, the console has two scenes and is ideal for improvised manual sequences. The crossfader 

controls the scene change between upper and lower fader rows. Not all functions of the crossfader and 

submasters are accessible in this mode.  

8.3. Theatre Mode 

The upper faders, C#  operate as channel faders while the lower faders, S# , operate as submaster 

faders. This mode is a conventional working mode for lighting consoles, where all features are available.    

8.4. Manual Mode 

Operates same as Theatre Mode except channel faders contribute to output levels on a HTP basis. Channel 

editing is only accessible via the keypad. 

8.5. Selecting Operating Modes 

1. Press [1_B]MODE.  

 

 The [1_B]MODE option is located in the 

first page of the softkeys. If necessary, press [F+] 

to search for it. 

 

 

2. Select the desired mode:  

   

 

For Theatre mode, press [1_B]THEATRE. [CH.MD] LED will be off.  

 

 

For Single mode, press [2_B]SINGLE. [CH.MD] LED will be on. 

 

 

For Double mode, press [3_B]DOUBLE. [CH.MD] LED will be blinking. 

  

 

For Manual mode, press [4_B]MANUAL. [CH.MD] LED will be off. 

 

 The operating mode can be changed at any time. No data loss will occur with a mode change, 

only access to various functions will be changed.   

 

 

 

 

 

 

Summary of Contents for PICCOLO SCAN











































































Reviews:

No comments