Leviton Piccolo Scan
6
2.2.5. LT-Link Connection
SUBD-9 connector, standard RS485: Connector for devices such as remote controls, expansion boxes, etc.
2.2.6. External Trigger
Input for 3 external triggers. Connector: XLR-4 female.
Pin Out:
Pin 1 – EXT 1
Pin 2 – EXT 2
Pin 3 – EXT 3
Pin 4 – Common
Each external signal (EXT 1, EXT 2, EXT 3) is connected with the common signal. To configure,
press [Menu][22]:EXT & Sound.
2.2.7. SMPTE
Connector: Stereo jack for 1Vpp SMPTE signals. The SMPTE input responds to the formats: 24, 25, 30 & 30
drop frame without adjusts.
Pin Out:
Pin 1 – 0 V ref. or SMPTE – (jack body)
Pin 2 – EXT 2
Pin 3 – SMPTE + (jack live point)
2.2.8. Audio
Connector: Stereo jack for 1Vpp audio signals (mono).
Pin Out:
Pin 1 – 0 V ref. – (jack body)
Pin 2 – N.C.
Pin 3 – (jack live point)
2.2.9. VGA Connection
SUBD-15 connector, standard video (VGA compatible)
2.2.10. Power Supply and Switch
An external power supply is provided with the console:
Voltage range: 90-264 VAC
Frequency: 47-63Hz
Output voltage: 12 VDC
Output current: 1.5 A / 18W
Output connector: Standard type P1J. Centre positive (+)
The console has a built-in power switch. If the console is not used for an extended period of time,
it is recommended to disconnect the power supply as well as turn off the power switch.
2.2.11. Work Light Connection
One or two work light connections are provided (depending on model) for work lights with 12V-15V/5W
bulbs. The work light level is adjusted from [Menu][32]:LIGHT
Pin Out (XLR-3):
Pin 1: 0 VREF
Pin 2: 12 VDC
Pin 3: 0 VREF
4 pin XLR
male
1
1
2
2
3
3
4
4
female
PUSH
2
1
3
Summary of Contents for PICCOLO SCAN
Page 72: ...Leviton Piccolo Scan 66...
Page 73: ...67...