LevelOne GEL-2670, User Manual, Page: 80 / 320

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 80 –
5.
Enter a group name. Note that the views assigned to a group must be
specified on the SNMP Accesses Configuration menu (see
page 81 ).
6.
Click Save.
Figure 22: SNMPv3 Group Configuration
C
ONFIGURING
SNMP
V
3 V
IEWS
Use the SNMPv3 View Configuration page to define views which restrict
user access to specified portions of the MIB tree. The predefined view
“default_view” includes access to the entire MIB tree.
CLI R
EFERENCES
"SNMP Commands" on page 330
P
ARAMETERS
These parameters are displayed:
◆
View Name - The name of the SNMP view. (Range: 1-32 characters,
ASCII characters 33-126 only)
◆
View Type - Indicates if the object identifier of a branch within the MIB
tree is included or excluded from the SNMP view. Generally, if the view
type of an entry is “excluded,” another entry of view type “included”
should exist and its OID subtree should overlap the “excluded” view
entry.
◆
OID Subtree - Object identifiers of branches within the MIB tree. Note
that the first character must be a period (.). Wild cards can be used to
mask a specific portion of the OID string using an asterisk.
(Length: 1-128)
W
EB
I
NTERFACE
To configure SNMPv3 views:
1.
Click Advanced Configuration, Security, Switch, SNMP, Views.
2.
Click “Add new view” to set up a new view.
3.
Enter the view name, view type, and OID subtree.
4.
Click Save.